Accidents happen, which sometimes means dealing with the aftermath of a blood stain on your shoes. Whether it’s from a small cut or a more serious injury, it’s important to know how to properly clean and remove blood from your shoes.
This article will you learn how to get blood out of shoes with our simple step-by-step guide. Whether it’s a fresh or dried stain, we’ve got you covered with a variety of methods. We will also discuss the importance of acting quickly and using the right cleaning products to prevent the stain from setting in and becoming harder to remove.
6 Easy Ways to Remove Blood Stains from Shoes:
- Use cold water and dish soap or laundry detergent:
- Use hydrogen peroxide:
- Use white vinegar
- Use baking soda
- Use cornstarch
- Use a commercial stain remover
Let’s Drive to the Details:
1. Cold Water and Dish Soap or Laundry Detergent:
Blood stains on shoes can be unsightly and difficult to remove, but with the right approach and cleaning products, it is possible to effectively remove the stain. One method for removing blood stains from shoes is to use cold water and either dish soap or laundry detergent. Whether you are dealing with a small stain or a large, ingrained one, these techniques can help you get your shoes looking clean and fresh once again.
To use cold water and dish soap or laundry detergent to remove blood stains from shoes, follow these steps:
- Begin by blotting the stain with a clean, dry cloth to remove as much excess blood as possible.
- Mix a solution of equal parts cold water and dish soap or laundry detergent.
- Using a clean cloth or brush, apply the solution to the stain and scrub gently to loosen the stain.
- Rinse the area with cold water and blot it dry with a clean cloth.
- If the stain is still visible, you can use a stronger cleaning solution, such as hydrogen peroxide or a commercial stain remover.
- Once the stain has been removed, allow the shoes to air dry completely before wearing them again.
It’s important to note that different types of shoes may require different cleaning methods, so it may be helpful to check the manufacturer’s care instructions before attempting to remove the stain. Additionally, be sure to test any cleaning solution on a small, inconspicuous area of the shoe before using it on the stain to ensure that it doesn’t cause any damage.
2. Use Hydrogen Peroxide:
To use hydrogen peroxide to remove blood stains from shoes, follow these steps:
- Begin by blotting the stain with a clean, dry cloth to remove as much of the excess blood as possible.
- Mix a solution of equal parts hydrogen peroxide and cold water.
- Using a clean cloth, sponge, or brush, apply the solution to the stain and allow it to sit for a few minutes.
- Blot the area with a clean cloth to remove the solution and the stain.
- If the stain is still visible, you can try repeating the process or using a stronger concentration of hydrogen peroxide.
It’s important to note that hydrogen peroxide can bleach or discolor certain fabrics, so it’s always a good idea to test it on a small, inconspicuous area before using it on the stain. Additionally, hydrogen peroxide should not be used on silk or wool fabrics.
You May Also Like: How to Tell if a Shoe is Slip Resistant
When using hydrogen peroxide to remove blood stains from shoes, be sure to follow these safety precautions:
- Wear gloves to protect your hands from contact with hydrogen peroxide.
- Avoid splashing the hydrogen peroxide on your skin or in your eyes.
- If you do get hydrogen peroxide on your skin or in your eyes, rinse the affected area immediately with cold water and seek medical attention if necessary.
- Store hydrogen peroxide in a cool, dry place out of reach of children and pets.
- Do not mix hydrogen peroxide with other cleaning chemicals, as this can produce harmful gases.
3. Use White Vinegar
To use white vinegar to remove blood stains from shoes, follow these steps:
- Begin by blotting the stain with a clean, dry cloth to remove as much excess blood as possible.
- Mix a solution of equal parts white vinegar and cold water.
- Using a clean cloth, sponge, or brush, apply the solution to the stain and allow it to sit for a few minutes.
- Blot the area with a clean cloth to remove the solution and the stain.
- If the stain is still visible, you can try repeating the process or using a stronger concentration of vinegar.
It’s important to note that vinegar can discolor certain fabrics, so it’s always a good idea to test it on a small, inconspicuous area before using it on the stain. Additionally, vinegar should not be used on silk or wool fabrics.
4. Use Baking Soda
To use baking soda to remove blood stains from shoes, follow these steps:
- Begin by blotting the stain with a clean, dry cloth to remove as much excess blood as possible.
- Mix a paste of baking soda and water in a small bowl. The paste should be thick enough to stick to the stain but not so thick that it is difficult to spread.
- Using a clean cloth or brush, apply the paste to the stain and allow it to sit for a few hours.
- Once the paste has dried, brush it off of the shoe and rinse the area with cold water.
- If the stain is still visible, you can try repeating the process or using a different cleaning method.
It’s important to note that baking soda can potentially damage certain types of shoes, so it’s always a good idea to test it on a small, inconspicuous area before using it on the stain. Additionally, be sure to follow the manufacturer’s care instructions for your shoes to ensure that you don’t cause any damage while cleaning.
5. Use Cornstarch
To use cornstarch to remove blood stains from shoes, follow these steps:
- Begin by blotting the stain with a clean, dry cloth to remove as much excess blood as possible.
- Sprinkle a generous amount of cornstarch over the stain.
- Allow the cornstarch to sit for a few hours, or overnight if possible. The cornstarch will absorb the blood and help to lift the stain from the fabric.
- Once the cornstarch has had time to work, use a clean, dry brush or cloth to brush or wipe off the cornstarch.
- Rinse the area with cold water to remove any remaining cornstarch.
- If the stain is still visible, you can try repeating the process or using a different cleaning method.
6. Use a Commercial Stain Remover
To use a commercial stain remover to remove blood stains from shoes, follow these steps:
- Begin by blotting the stain with a clean, dry cloth to remove as much excess blood as possible.
- Follow the manufacturer’s instructions for the commercial stain remover, including any precautions or warnings.
- Apply the stain remover to the affected area according to the manufacturer’s instructions.
- Allow the stain remover to sit for the recommended amount of time before blotting the area with a clean cloth to remove the solution and the stain.
- Rinse the area with cold water and blot it dry with a clean cloth.
- If the stain is still visible, you can try repeating the process or using a different cleaning method.
It’s important to note that different types of shoes may require different cleaning methods, so it may be helpful to check the manufacturer’s care instructions before attempting to remove the stain. Additionally, be sure to test any cleaning solution on a small, inconspicuous area of the shoe before using it on the stain to ensure that it doesn’t cause any damage.